NIHON KOHDEN Neuro Unit AE-920P

Simple

• Since there are only two buttons (power/start) on the EEG headset, the operation is quite simple and error-free.
• Just apply the EEG headset with disposable electrodes attached beforehand to a patient’s head. Anyone can do it. Thanks to the headset’s flexible arms, it fits various shapes of patient heads.
• The bedside monitor displays various helpful information on the screen, including visual fitting guidance and status information such as the battery and electrode status of the headset. 
• “EEG Trend graph” enables quick data review with various trend data including raw waveforms.

Wireless

• By using Bluetooth® communication, the patient does not need to be surrounded by cables. This is ideal for an ER/ICU setting where many cables from several medical devices are connected to the patient’s body, creating a nuisance for the medical staff attending to the patient.

Noise-robust

• The built-in active amplifier reduces external noise.
• The built-in motion sensor makes it easier to distinguish a seizure wave from noise caused by motion.

 Ideal performance for muscle relaxation monitoring

• Visible and tangible benefits in monitoring patients
• Enables moderate doses of muscle relaxant and antagonist.
• Helps confirm safe intubation and extubation.

Ease of use

• Hand-held controller
• Quick installation
• Complete patient information along with vital information can be viewed on one patient monitor screen and documentation can be viewed via our HL7 output.
• Measurements can be obtained from any nerve or muscle.

Clinical support

• NMT monitoring gives complete information of patient’s dosage requirement facilitates optimal and cost-effective administration of neuromuscular blocking drugs.
• Different stimulation types includes
  1. TOF (Train-Of-Four)
  2. DBS (Double Burst Stimulation)
  3. PTC (Post tetanic count)
  4. TET (Tetanic stimulation)

All-in-one comprehensive hemodynamic solution

AP-170PK enables PiCCO and ProAQT parameters to be measured with one unit.

Supports Therapeutic decision findings

PiCCO technologyThe PiCCO technology is a combination of the transpulmonary thermodilution method and arterial pulse contour analysis that provides advanced hemodynamic and volumetric management information.

ProAQT technology

The ProAQT technology continuously measures arterial pressure with a pressure transducer and calculates circulatory dynamics trends.

Smart data review guides you to faster intervention

You can check all hemodynamics data at a glance and visualize volumetric information.

• Respiration gas concentration measurement
• Respiration volume measurement (GF-220R)
• Mainly used in the operating room
• Continuous monitoring of O2, CO2, N2O and volatile anesthetic agents (halothane, enflurane, isoflurane, sevoflurane, and desflurane)
• Continuous monitoring of airway flow rate, airway pressure and airway volume (GF-220R only)
• Expiratory and inspiratory phases of respiration from momentary concentrations
• Calculates the rate of respiration and determines the concentration of each component during inspiration and at exhalation.
• Automatic identification of five anesthetic agents
• Fast measurement just 60 seconds after turning the power on
• Small sampling flow rate of 200 mL/minute allows measurement of volatile anesthetics and is useful for neonatal monitoring.
• Automatic or user-set flow rate
• Can be mounted horizontally or vertically.

*This is an optional add-on unit for Nihon Kohden bedside monitors.